TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 621 of 933

TM 9-2520-270-34

Q

2

57.

INSTALL LOCKWIRE (1)

a. Using wire-twister pliers, install

Iockwire (1) through bolt (2) and

through hole (3) in plate (4).

59. CONNECT SHAFT (5) TO ROD END

CONNECTOR (10).

a.

b.

c,

Position rod end connector (10)

under pin hole (1 1).

Turn adjuster (6) to aline rod end

connector (10) with hole (1 1).

Insert pin (12) in hole (1 1).

60. USING l/2-i NCH DRIVE TORQUE

WRENCH WITH ADAPTER AND

9/16-l NCH CROWFOOT, TORQUE

NUT (13) TO 17-20 ft-lb (2-3 mkg).

4-292

Change 1

58. INSTALL SHOULDERED SHAFT (5).

a. Position adjuster (6) against

housing (7).

b. Insert shaft (5) into housing (7) so

that pointer (8) is toward housing

face (9).

@j--@

--

‘-=

61. INSTALL SHIM (14).

-—-

62. INSTALL NEW RETAINING RING (15).

a. Using retaining-ring pliers, install

1

retaining ring (1 5).