TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 618 of 933

TM 9-2520-270-34

42. (DELETED)

43. INSTALL INNER BRAKE ACTUATING

PLATE (3).

a.

b.

c.

d.

Install eight bearing balls (4) in

eight recesses (5) on plate (6).

Coat new special rubber seal (7)

with transmission oil.

Install seal (7) on plate (3).

Install plate (3) with ball recesses (8)

facing balls (4). Be sure plate is firmly

seated on balls (4).

44. A LINE PLATE (3).

a. (H) Hold plate (3) down by hand.

b. Using clevis (9) as lever, move plate (6)

until plate (3) is at lowest position.

c. Helper apply pressure to plates (6)

and (3). Repairer aline slots (10) in

plate (3) with eight slots (11) by

moving clevis (9).

d. Install two

in place.

GO TO NEXT PAGE

pins (12) to hold plate (3)

Change 2

4-289