TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 615 of 933

TM 9-2520-270-34

32. INSPECT RIGHT-HAND

RETAINER PLATE ASSEMBLY (1).

a. Inspect plate (1) and insert (2)

for damage. See page 2-5.

b. Repair insert if damaged. See task

REPAIR RIGHT-HAND RETAINER

PLATE ASSEMBLY INSERT, page 4-312.

34. INSTALL NEW SEAL (5).

a. If seal (5) was removed or housing (6)

was replaced, go to step 34b.

If not, go to step 35.

b. Coat new seal (5) with transmission

oil.

c. Using plastic-faced hammer, tap

seal (5) into place with flat metal sur-

face facing outward until seal is

fully seated.

33. INSPECT RIGHT-HAND OUTER

BRAKE ACTUATING PLATE (3).

a. Inspect plate (3) and inserts (4)

for damage. See page 2-5.

b. Repair inserts if damaged. See task

REPAIR RIGHT-HAND BRAKE

ACTUATING PLATE INSERTS,

page 4-310.

4-286