TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 616 of 933

TM 9-2520-270-34

35. REPAIRER AND HELPER TURN

HOUSING (1) OVER.

36. INSTALL TWO PLUGS (2).

a. Coat two new preformed packings (3)

with transmission oil. Install packings

on two plugs (2).

b. Using 3/8-inch drive brace handle and

3/16-inch socket wrench attachment,

install two plugs (2).

37. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 3/16-lNCH SOCKET

WRENCH ATTACHMENT, TORQUE

TWO PLUGS (2) TO 110-120 in-lb

(127-138 cmkg).

38. INSTALL OUTER BRAKE ACTUATING

PLATE (4).

a. Coat thrust washer (5) with

transmission oil and install.

b. Position plate (4) with eight bearing

ball recesses (6) showing.

c. Aline two screw holes (7) and “R”

mark (8) with adjustment cover

area (9).

GO TO NEXT PAGE

4-287