TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 623 of 933

TM 9-2520-270-34

REPLACE RIGHT-HAND OUTPUT CARRIER ASSEMBLY

This task covers: Remove (page 4-294). Install (page 4-298).

INITIAL SETUP

Tools:

General mechanic’s tool kit:

automotive — (Item 33, App C)

Industrial goggles — (Item 39, App C)

Inserted hammer face holder —

(Item 39A, App C)

Inserted hammer face — (Item 39B, App C)

Inserted hammer face — (Item 39C, App C)

Micrometer caliper set – (Item 52, App C)

Micrometer depth gage —

(Item 54, App C)

Retaining-ring pliers – (Item 59, App C)

Socket wrench set – (Item 89, App C)

Torque wrench – (Item 99, App C)

Materials/Parts:

Gasket

Lock washer (8)

Measuring plate (Item 7, App D)

Shim Set

Wood block (2) — (Item 2, App D)

Wood block (2) — (Item 4, App D)

Personnel Required:

Track Veh Rep 63H10

Helper (H)

References:

REMOVE

1. REMOVE RIGHT-HAND OUTPUT

HOUSING. See task REPLACE

RIGHT-HAND OUTPUT HOUSING,

page 4-270.

2. REMOVE EIGHT SCREWS (1).

a. Using 3/8-inch drive ratchet handle

with extension and 7/16-inch socket,

remove eight screws (1) and lock

washers (2). Discard lock washers.

TM 9-214

Equipment Conditions:

Transmission mounted on tip-over stand.

See page 2-144.

4-294

Change 2