TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 629 of 933

TM 9-2520-270-34

26. PLACE OUTPUT HOUSING (1) ON

TWO WOOD BLOCKS (ITEM 4)

SO THAT SPUR GEAR (2) IS

NOT TOUCHING WORKBENCH.

28. POSITION MEASURING PLATE (5)

ACROSS OUTPUT HOUSING

COLLAR (6).

a. Place plate (5) across output

housing collar (6).

b. Position plate (5) to cover half of

output carrier splined hole (7).

27. SEAT CONE AND ROLLERS (3)

IN HOUSING (1).

a. Using plastic faced hammer,

gently tap carrier assembly (4)

down until cone and rollers (3)

are fully seated.

29. OBTAIN DIMENSION B.

a. Using depth gage, measure

distance from top of plate (5) to

bottom of splined hole (7).

b. Record results as dimension B.

c. Remove plate.

4-300

Change 2

GO TO NEXT PAGE