TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 626 of 933

TM 9-2520-270-34

12.

13

INSPECT PLANETARY GEARS (1).

a.

b.

Inspect four gears (1) for damage.

See page 2-5.

If gears (1) are not damaged and rotate

freely, go to step 13. If gears are

damaged or do not move freely, go to

step 15.

INSPECT SPUR GEAR (2) FOR

DAMAGE. See page 2-5.

a. If spur gear is damaged, go to step 15.

If not, go to step 14.

16. INSTALL CARRIER ASSEMBLY (5) IN

OUTPUT HOUSING (6).

a.

b.

c.

Repairer and helper position

housing (6) with bottom side up

Aline gear teeth of hub (7) with

brake plate teeth (8).

Install carrier assembly (5)

in housing (6).

14.

15.

INSPECT PLANETARY GEAR

SPINDLES (3) AND PINS (4).

a. If all spindles (3) and pins (4) are

tight, go to step 16. If not, go to

step 15.

REPAIR RIGHT-HAND OUTPUT

CARRIER ASSEMBLY, page 4-304.

17. REPAIRER AND HELPER TURN OUTPUT

HOUSING (6) OVER WHILE HOLDING

CARRIER ASSEMBLY IN PLACE.

GO TO NEXT PAGE

Change 2

4-297