TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 632 of 933

TM 9-2520-270-34

38. INSTALL SEAL (1).

a. Install new gasket (2).

b. Install seal (1) on shaft (3) with

beveled end (4) toward output

housing (5).

39. INSTALL EIGHT SCREWS (6).

a. Using 3/8-inch drive ratchet handle

with extension and 7/16-inch

socket, install eight new lock

washers (7) and screws (6).

40. USING 3/8-lNCH DRIVE TORQUE

WRENCH WITH EXTENSION AND

7/16-lNCH SOCKET, TORQUE

EIGHT SCREWS (6) TO 75-100 in-lb

(86-115 cmkg).

41. INSTALL RIGHT-HAND OUTPUT

HOUSING. See task REPLACE

RIGHT-HAND OUTPUT HOUSING,

page 4-270.

END OF TASK

Change 2

4-303