TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 614 of 933

TM 9-2520-270-34

24.

25.

26.

27.

REPAIRER AND HELPER TURN

HOUSING (1) OVER.

INSPECT TAPERED ROLLER CUP (2).

a. Inspect cup (2) for damage.

See TM 9-214.

b. If cup (2) is damaged, go

to step 26. If not, go to step 28.

REPLACE RIGHT-HAND OUTPUT

MECHANICAL HOUSING (1). RECORD

FAILURE ON DA FORM 2407 AND

RETURN DEFECTIVE HOUSING TO

DEPOT.

GO TO STEP 32.

CAUTION

Do not mar housing while prying out seal.

Damage to equipment can occur.

29. REMOVE SEAL (3).

a. Using screwdriver, pry out and

discard seal (3).

30. CLEAN RIGHT-HAND OUTPUT

MECHANICAL HOUSING.

a. Clean housing and piece parts.

See page 2-2.

31. INSPECT RIGHT-HAND OUTPUT

MECHANICAL HOUSING.

a. Inspect housing, piece parts,

and inserts, See page 2-5.

b. Replace housing if damaged. Record

failure on DA FORM 2407 and

return defective housing to depot.

c. Repair inserts if damaged. See task

REPAIR RIGHT-HAND OUTPUT

HOUSING INSERTS, page 4-308.

28. INSPECT ENCASED SEAL (3).

a. Inspect seal (3) for scoring, cuts, or

other damage. See page 2-5.

b. If seal (3) is damaged, go to step 29.

If seal is not damaged, go to step 30.

GO TO NEXT PAGE

Change 2

4-285