TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 611 of 933

TM 9-2520-270-34

WARNING

Use care when removing

retaining ring. Retaining ring

can fly.

Personnel can be

injured. Always wear goggles.

CAUTION

Do not mar housing while prying out retaining

ring. Damage to equipment can occur.

11. REMOVE RETAINING RING (1).

a. Remove and discard Iockwire (2).

b. Using 3/8-inch drive brace handle

and 3/8-inch socket, remove bolt (3)

and washer (4).

c. Push down on retainer plate (5)

and using screwdriver, pry out

retaining ring (1). Use notches (6)

as pry points.

12. REMOVE RETAINER PLATE (5) AND

EIGHT PINS (7).

NOTE

Plates should be installed in same order and

facing same way as removed.

13. REMOVE 10 STATIONARY SERVICE

BRAKE PLATES (8) AND 9 ROTAT-

ING SERVICE BRAKE PLATES (9).

4-282