TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 646 of 933

TM 9-2520-270-34

13. REMOVE ACCESS COVER (1), IF

INSTALLED.

a. Using 3/8-inch drive brace handle

and 7/16-inch socket, remove eight

screws (2) and lock washers (3).

Discard lock washers,

b. Remove cover (1) and gasket (4).

Discard gasket.

15. ROTATE LEVER ARM (5) AND APPLY

FIRM PRESSURE TO ACTUATE BRAKES.

a. If shaft (6) does not rotate, go to

step 20, If shaft does rotate, go to

step 17.

16. (DELETED)

14. ATTACH LEVER ARM (5) TO

SHOULDERED SHAFT (6).

a. Position lever arm (5).

b. Install washer (7), screw (8), and

self-locking nut (9).

GO TO NEXT PAGE

Change 1

4-317