TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 727 of 933

TM

9-2520-270-34

24. INSTALL FILTER (1).

a. Install packing (2) on filter (1).

b. Install filter (1) in filter cavity (3).

c. Tighten filter (1).

25. GO TO STEP 37

27. REMOVE VALVE ASSEMBLY (4).

a. Carefully pull valve assembly (4)

straight out of hole in piston (5).

28. REPLACE VALVE ASSEMBLY (4).

29. GO TO STEP 32.

30. REMOVE VALVE ASSEMBLY (4).

a. Carefully pull valve assembly (4)

straight out of hole in piston (5).

26. CHECK ACTUATOR VALVE

ASSEMBLY (4).

a. Move valve assembly (4) in and out of

piston (5).

b. If valve assembly (4) binds, go to

step 27. If not, go to step 30.

4-394