TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 722 of 933

TM 9-2520-270-34

INSPECT RIGHT-HAND HYDRAULIC ASSEMBLY

INITIAL SETUP

Tools:

Personnel Required:

General mechanic’s tool kit:

Track Veh Rep 63H10

automotive — (Item 33, App C)

Helper (H)

Socket wrench adapter —

(item 75, App C)

Equipment Conditions:

Socket wrench attachment —

(Item 85, App C)

Socket wrench set – (Item 89, App C)

Torque wrench — (Item 100, App C)

Materials/Parts:

Transmission oil — (Item 12, App B)

WARNING

Hydraulic assembly is heavy

and could fall and injure you or

other personnel.

REPAIRER AND HELPER POSITION

HYDRAULIC ASSEMBLY SO THAT

OUTER HYDRAULIC UNIT (1)

FACES UP.

INSPECT SPLINED TEETH (2) ON

OUTER COUPLING (3).

a. If teeth (2) are not damaged, go to

step 3. If teeth are damaged, go to

step 37.

Hydraulic assembly on workbench. See

page 4-378.

CAUTION

Tools must not be used to inspect tightness

of parts. Staking of bushings can be damaged.

3. INSPECT NINE SCREWS (4) AND

STAKED BUSHINGS (5).

a. If screws (4) and bushings (5) are

tight, go to step 4. If screws or

bushings are loose or missing, go

to step 37.

GO TO NEXT PAGE

Change 1

4-389