TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 712 of 933

TM 9-2520-270-34

9. REMOVE SPUR GEAR (1) WITH

STRAIGHT SHAFT (2) AND THRUST

WASHER BEARING (3).

10. REMOVE THIRD RANGE

CLUTCH HOUSING (4).

a. (H) Working on right side of trans-

mission housing (5), use pry bar to

hold clutch housing (4) from turning.

b. Remove six screws (6) and take off

clutch housing (4).

12. DISCONNECT HOSE ASSEMBLY

11629168-7 (10).

11. REMOVE HOSE ASSEMBLY

a. Unscrew hose nut (11).

11629168-2 (7).

a. Unscrew hose nut (8).

13. DISCONNECT HOSE ASSEMBLY

b. Unscrew hose nut (9) and remove

11628453-7 (12).

hose assembly (7).

a. Unscrew hose nut (13).

GO TO NEXT PAGE

4-379