TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 702 of 933

47. SECURE HOSE ASSEMBLY (1).

a. Attach hose (1) to lower transmission

housing (2) with two clamps (3).

b. Using 3/8-inch drive ratchet handle

and 5/32-inch socket wrench attach-

ment, install new short screw (4),

spacer (5), and new bolt (6).

48. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 5/32-lNCH SOCKET

WRENCH ATTACHMENT, TORQUE

SCREW (4) AND BOLT (6) TO

35-45 in-lb (40-52 cmkg).

49. USING WIRE-TWISTER PLIERS,

INSTALL NEW LOCKWIRE (7)

THROUGH SCREW (4) AND AROUND

HOSE (1). REPEAT FOR BOLT (6).

50. INSTALL RIGHT-HAND HYDRAULIC

ASSEMBLY. See task REPLACE RIGHT-

56. INSTALL LEFT-HAND INTERMEDIATE

HAND HYDRAULIC ASSEMBLY, page 4-378.

HOUSING ASSEMBLY. See task

REPLACE LEFT-HAND INTERMEDIATE

51. INSTALL SECOND RANGE BRAKE

HOUSING ASSEMBLY, page 4-220.

ASSEMBLIES. See task REPLACE

SECOND RANGE BRAKE ASSEMBLIES,

57. INSTALL RIGHT-HAND INTERMEDIATE

page 4-432.

52. INSTALL HYDRAULIC ACCUMULATOR.

See task REPLACE HYDRAULIC

ACCUMULATOR, page 4-448.

58.

53. INSTALL CROSS SHAFT ASSEMBLY.

See task REPLACE CROSS SHAFT

ASSEMBLY, page 4-458.

59.

54. DELETED.

HOUSING ASSEMBLY. See task

REPLACE RIGHT-HAND INTERMEDIATE

HOUSING ASSEMBLY, page 4-170.

INSTALL RIGHT-HAND OUTPUT

HOUSING. See task REPLACE RIGHT-

HAND OUTPUT HOUSING, page 4-270.

INSTALL LEFT-HAND OUTPUT

HOUSING. See task REPLACE LEFT-

HAND OUTPUT HOUSING, page 4-314.

INSTALL CONTROLLER ASSEMBLY.

See task REPLACE CONTROLLER

ASSEMBLY, page 3-32.

60.

55. INSTALL POSITIVE CLUTCH. See task

REPLACE POSITIVE CLUTCH, page 4-356.

END OF TASK

Change

3

4-369

TM 9-2520-270-34