TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 700 of 933

37. INSTALL NEW LOCKWIRE (1).

a. Using wire-twister pliers, install

Iockwire (1) through screw (2) and

around hose and clamp (3).

Do not twist hose assembly when connecting

to elbow. Damage to equipment can occur.

39. CONNECT HOSE ASSEMBLY (7).

a. Connect and hand tighten hose

assembly (7) to elbow (4).

38. INSTALL 45° ELBOW (4), 90° ELBOW (5),

AND PREFORMED PACKINGS (6). See

task INSTALL ELBOW (45° AND 90°),

page 2-179.

39.1 USING OPEN-END WRENCH, HOLD

HOSE NUT (8).

40. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-INCH CROWFOOT

TORQUE SWIVEL NUT (9) TO

125-135 in-lb (144-155 cmkg).

41. RETORQUE LOCKNUT (10) ON

ELBOW (4).

a.

b.

c.

Loosen locknut (10) on elbow (4) to zero

torque.

Hold elbow (4) from turning.

Torque locknut (10) to 125-135 in-lb

(144-155 cmkg).

Change 3

4-367

TM 9-2520-270-34

CAUTION