TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 695 of 933

TM 9-2520-270-34

15. REMOVE 45° HOSE TO BOSS ELBOW (1)

AND 90° HOSE TO BOSS ELBOW (2).

a. Note position of two elbows (1) and (2)

so that they will be put back the same

way.

b. Unscrew elbows (1) and (2).

c. Remove and discard two preformed

packings (3).

17. USING WIRE-TWISTER PLIERS,

REMOVE AND DISCARD THREE

LOCKWIRES (7).

4-362

18. RELEASE HOSE ASSEMBLY (4).

16. DISCONNECT HOSE ASSEMBLY (4)

11628453-3.

a. Working on left side of trans-

mission (5), unscrew hose nut (6).

a.

b.

Using 3/8-inch drive ratchet handle

with extension and 5/32-inch

socket wrench attachment, remove

three screws (8) from clamps (9).

Discard three screws.

Position hose (4) clear of work area.