TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 698 of 933

TM 9-2520-270-34

28. ATTACH REMOVAL ASSEMBLY (1).

a. Install two screws (2) in screw

holes (3) in hydraulic assembly (4).

b. Tighten two screws (2).

CAUTION

Do not contact hoses with hydraulic assem-

bly when lowering into place. Damage to

equipment can occur.

30. REPAIRER AND HELPER INSTALL

HYDRAULIC ASSEMBLY (4).

Lower hydraulic assembly (4) into

left side of transmission housing (6).

Seat two pins (7) by moving hydraulic

assembly (4) back and forth.

Remove lifting device (5).

WARNING

Hanging loads could kill or

injure you. Keep away from

hanging loads and overhead

equipment.

29. LIFT HYDRAULIC ASSEMBLY (4)

OFF WORK SURFACE.

a. Attach lifting device (5) to removal

assembly (1).

b. Lift hydraulic assembly (4) off

work surface.

GO TO NEXT PAGE

4-365