TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 697 of 933

TM 9-2520-270-34

23. PLACE HYDRAULIC ASSEMBLY (1)

ON WORK SURFACE.

a. Lower hydraulic assembly (1) to

work surface.

b. Remove lifting device (2).

25.

26.

REMOVE AND DISCARD PREFORMED

PACKING (5).

INSPECT MAIN HOUSING INSERTS.

a. Repair inserts if damaged. See

task REPAIR MAIN HOUSING

INSERTS, page 4-150.

Change 1

24.

24.1

REMOVE REMOVAL ASSEMBLY

a. Unscrew two screws (4) and

remove removal assembly (3).

(3).

INSPECT HYDRAULIC ASSEMBLY (1).

See task INSPECT LEFT-HAND

HYDRAULIC ASSEMBLY, page 4-370.

27. INSTALL NEW PREFORMED

PACKING (5).

a. Coat new preformed packing (5) with

transmission oil. Put new preformed

packing in place.

4-364