TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 699 of 933

TM 9-2520-270-34

NOTE

Race may be lifted by hand for installing two

bolts that are close to main housing.

31. INSTALL SEVEN SHORT BOLTS (1)

AND ONE LONG BOLT (2) WITH

EIGHT WASHERS (3).

a. Coat threads of eight bolts (1)

and (2) with sealant compound.

b. Install seven short bolts (1), one long

bolt (2), and eight washers (3).

32. USING 1/2-lNCH DRIVE TORQUE

WRENCH, TORQUE SEVEN SHORT

BOLTS (1) AND ONE LONG

BOLT (2) TO 85-95 ft-lb (12-13 mkg).

33. REMOVE REMOVAL ASSEMBLY (4).

a. Unscrew two screws (5) and remove

removal assembly (4).

34.

35.

36.

POSITION TRANSMISSION

CONTROLLER SIDE UP.

SECURE TWO HOSE CLAMPS (6).

a. Install spacer (7). Using 3/8-inch drive

ratchet handle with extension and

5/32-inch socket wrench attachment,

install new screw (8) through two

clamps (6) and spacer (7).

USING 3/8-lNCH DRIVE TORQUE

WRENCH WITH EXTENSION AND

5/32-lNCH SOCKET WRENCH

ATTACHMENT, TORQUE SCREW (8)

TO 35-45 in-lb (40-52 cmkg).

4-366