TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 690 of 933

TM 9-2520-270-34

5.

INSPECT 12 SPUR GEARS (1).

a. Inspect 12 gears (1) for damage.

See page 2-5.

b. If gears (1) are not damaged and rotate

freely, go to step 6. If gears are

damaged or do not rotate freely, go

to step 8.

INSTALL

9.

10.

11.

12.

INSTALL CLUTCH (2).

a. Turn clutch (2) until gears (1) mesh

with ring gear (5) and second range

sun spur gear (6). Clutch will slide

into place.

INSTALL LEFT-HAND INTERMEDIATE

HOUSING ASSEMBLY. See task

REPLACE LEFT-HAND INTERMEDIATE

HOUSING ASSEMBLY, page 4-220.

INSTALL LEFT-HAND OUTPUT

HOUSING. See task REPLACE

LEFT-HAND OUTPUT HOUSING,

page 4-314.

INSTALL CONTROLLER ASSEMBLY.

See task REPLACE CONTROLLER

ASSEMBLY, page 3-32.

6.

7.

8.

TURN CLUTCH (2) OVER

INSPECT PLANETARY GEAR

SPINDLES (3) AND PINS (4).

a. If all spindles (3) and pins (4) are

tight, go to step 9. If not, go to

step 8.

REPLACE CLUTCH (2). RECORD

FAILURE ON DA FORM 2407 AND

RETURN DEFECTIVE CLUTCH TO

DEPOT.

END OF TASK

Change 2

4-357 (4-358 blank)