TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 681 of 933

TM 9-2520-270-34

REPAIR LEFT-HAND OUTPUT HOUSING INSERTS

DESCRIPTIO N

This task gives the location and size of inserts used in the left-hand output housing. Part or item

numbers of tools, kits, and inserts, and working dimensions are given below. For procedures to

remove, repair, and install inserts, refer to Replace Inserts. See page 2-171.

INITIAL SETUP

Tools:

General mechanic’s tool kit:

automotive — (Item 33, App C)

industrial goggles — (Item 39, App C)

Inserts wrench — (Item 40, App C)

Inside/outside indicator caliper —

(Item 41, App C)

Lockring drive tool – (Item 45, App C)

Portable electric drill – (Item 58, App C)

Screw extractor set – (Item 62, App C)

Screw threading set – (Item 65, App C)

Socket wrench set – (Item 88, App C)

Socket wrench set – (Item 89, App C)

Transmission insert repair kit —

(Item 103, App C)

Twist drill set – (Item 105, App C)

Compressed air source, 30 psi

(207 kPa) maximum

Materials/Parts:

Sealant compound — (Item 11, App B)

Transmission oil – (Item 12, App B)

Lockring

Lockring insert

Personnel Required:

Track Veh Rep 63H10

Equipment Conditions:

Left-hand output housing on

workbench. See page 4-323.

REPAIR

4-348

Change 1