TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 683 of 933

TM 9-2520-270-34

REPAIR LEFT-HAND BRAKE ACTUATING PLATE INSERTS

DESCRIPTION

This task gives the location and size of inserts used in the left-hand brake actuating plate. Part or

item numbers of tools, kits, and inserts, and working dimensions are given below.

INITIAL SETUP

Tools:

Materials/Parts:

General mechanic’s tool kit:

Honing stone – (Item 4B, App B)

automotive — (Item 33, App C)

Sealant compound – (Item 11, App B)

Industrial goggles — (Item 39, App C)

Transmission oil – (Item 12, App B)

Inside/outside indicator caliper —

(Item 41, App C)

Personnel Required:

Portable electric drill – (Item 58, App C)

Screw threading set – (Item 65, App C)

Track Veh Rep 63H10

Socket wrench set – (Item 88, App C)

Transmission insert repair kit —

Equipment Conditions:

(Item 103, App C)

Compressed air source, 30 psi

Brake actuating plate on workbench.

(207 kPa) maximum

See page 4-323.

1.

2..

INSPECT INSERTS (1). See

page 2-5.

IF ANY INSERT (1) IS DAMAGED,

SEE REPLACE INSERTS, page 2-171.

SEE CHART FOR REPLACEMENT

INFORMATION.

STANDARD AND OVERSIZE INSERT REPLACEMENT INFORMATION

4-350

Change 1