TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 675 of 933

TM 9-2520-270-34

31. REMOVE TWO WOOD BLOCKS FROM

UNDER OUTPUT HOUSING (1).

WARNING

Retaining ring is installed

under high tension. Use care

when removing and installing

retaining ring. Personnel can

be injured. Always wear

goggles.

33. REMOVE RETAINING RING (4).

a. Using retaining-ring pliers, remove

retaining ring (4).

32

REPAIRER AND HELPER PLACE

TWO WOOD BLOCKS (2) (ITEM 2)

UNDER CARRIER ASSEMBLY (3).

CAUTION

Do not scratch carrier shaft surface when

installing retaining ring. Equipment can be

damaged.

34. INSTALL NEW WASHER (5) AND

RETAINING RING (4).

a. Install washer (5) on shaft (6).

b. Using retaining-ring pliers, install

retaining ring (4) sharp-face up in

groove (7) on shaft (6),

4-344

Change 2