TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 665 of 933

TM 9-2520-270-34

55. INSTALL SHOULDERED SHAFT (5).

54. INSTALL LOCKWIRE (1).

a. Using wire-twister pliers, install

Iockwire (1) through bolt (2) and

through hole (3) in plate (4).

56. CONNECT SHAFT (5) TO ROD END

CONNECTOR (10).

a.

b.

c.

Position rod end connector (10)

under pin hole (11).

Turn adjuster (6) to aline rod end

connector (10) with hole (11).

Insert pin (12) in hole (11).

57. USING 1/2-lNCH DRIVE TORQUE

WRENCH WITH ADAPTER AND 9/16

INCH CROWFOOT, TORQUE NUT (13)

TO 17-20 ft-lb (2-3 mkg),

4-334

Change 1

a. Position adjuster (6) against

housing (7).

b. Insert shaft (5) into housing (7) so

that pointer (8) is toward housing

face (9).

58. INSTALL SHIM (14).

59. INSTALL NEW RETAINING RING (15).

a. Using retaining-ring pliers, install

retaining ring (15).