TM
9-2520-270-34
CAUTION
Do not install brake plates without
coating with transmission oil. Equipment
can be damaged.
NOTE
Plates should be installed in the same order
and facing same way as removed.
48. INSTALL Stationary SERVICE
BRAKE PLATE (1).
a. Coat plate (1) with transmission oil
before assembly.
b. Aline plate tabs (2) with pins (3).
L.
c. Install plate (1) so it is facing same
way
as removed.
L
‘+
51. INSTALL RETAINER PLATE (7).
a. Install plate (7) with bolt hole (8)
facing screw hole (9).
b. Install retaining ring (10) with slot
alined with bolt hole (8),
CAUTION
Do not install brake plates without
coating with transmission oil. Equipment
can be damaged.
49.
INSTALL ROTATING SERVICE
BRAKE PLATE (4).
a.
b.
c.
Coat plate (4) with transmission oil
before assembly.
Aline plate splines (5) with splines on
carrier (6).
Install plate (4) so it is facing
the same way as removed.
50. REPEAT STEPS 48 AND 49 UNTIL
10 STATIONARY PLATES (1) AND
9 ROTATING PLATES (4) ARE
INSTALLED.
52. INSTALL WASHER
(11 )
AND BOLT
(1
2).
a. Coat threads of bolt (12) with sealant
compound.
b. Using 3/8-inch drive brace handle and
3/8-inch socket, install washer (11 )
and bolt (12) in hole (8).
53. USING 3/8-l NCH DRIVE TORQUE
WRENCH AND 3/8-l NCH SOCKET,
TORQUE BOLT (12) TO 60-75 in-lb
(69-86 cmkg).
GO TO NEXT PAGE
4-333