TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 667 of 933

REPLACE LEFT-HAND OUTPUT CARRIER ASSEMBL Y

DESCRIPTION

This task covers: Remove (page 4-336). Install (Page 4-340).

INITIAL SETUP

Tools:

Materials/Parts: (cont)

General mechanic’s tool kit:

Shim set

automotive — (Item 33, App C)

Measuring plate — (Item 7, App D)

Industrial goggles — (Item 39, App C)

Wood block (2) — (Item 2, App D)

Inserted hammer face holder —

Wood block (2) — (Item 4, App D)

(Item 39A, App C)

Inserted hammer face — (Hem 39B, APP C) Personnel Required:

Inserted hammer face – (Item 39C, App C)

Micrometer caliper set – (Item 52, App C)

Track Veh Rep 63H10

Micrometer depth gage —

Helper (H)

(Item 54, App C)

Retaining-ring pliers — (Item 59, App C)

References:

Socket wrench set – (Item 89, App C)

Torque wrench – (Item 99, App C)

TM 9-214

Materials/Parts:

Equipment Conditions:

Gasket

Transmission mounted on tip-over stand.

Lock washer (8)

See page 2-144.

1.

2.

REMOVE LEFT-HAND OUTPUT

HOUSING. See task REPLACE LEFT-

HAND OUTPUT HOUSING, page 4-314.

REMOVE EIGHT SCREWS (1).

a. Using 3/8-inch drive ratchet handle

with extension and 7/16-inch socket,

remove eight screws (1) and lock

washers (2). Discard lock washers.

4-336

Change 2

TM

9-2520-270-34