TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 660 of 933

TM 9-2520-270-34

23.

24.

REPAIRER AND HELPER TURN

LEFT-HAND OUTPUT

MECHANICAL HOUSING (1) OVER.

INSPECT TAPERED ROLLER CUP (2)

a. Inspect cup (2) for damage. See

TM 9-214.

b. If cup (2) is damaged, go to step 25.

If not, go to step 27.

25. REPLACE LEFT-HAND OUTPUT

MECHANICAL HOUSING (1), RECORD

FAILURE ON DA FORM 2407 AND

RETURN DEFECTIVE MECHANICAL

HOUSING TO DEPOT.

26. GO TO STEP 31.

27. INSPECT ENCASED SEAL (3).

a. Inspect seal (3) for scoring, cuts, or

other damage.

b. If seal (3) is damaged, go to step 28.

If not, go to step 29.

CAUTION

Do not mar housing while prying out seal.

Damage to equipment can occur.

28. REMOVE SEAL (3).

a. Using screwdriver,

discard seal (3).

pry out and

29. CLEAN LEFT-HAND OUTPUT

MECHANICAL HOUSING (1).

a. Clean housing and piece parts.

See page 2-2.

30. INSPECT LEFT-HAND OUTPUT

MECHANICAL HOUSING (1).

a. Inspect housing, piece parts, and

inserts. See page 2-5.

b. Replace housing (1) if damaged.

Record failure on DA FORM 2407 and

return defective housing to depot.

c. Repair inserts if damaged. See task

REPAIR LEFT-HAND OUTPUT

HOUSING INSERTS, page 4-348.

GO TO NEXT PAGE

Change 2

4-329