TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 668 of 933

TM 9-2520-270-34

WARNING

Retaining ring is installed

under high tension. Use care

when removing and installing

retaining ring. Personnel can

be injured.

Always wear

goggles.

CAUTION

Do not scratch carrier shaft when removing

retaining ring. Equipment can be damaged.

4. REMOVE TAPERED CONE AND

ROLLERS (4).

a. Using retaining-ring pliers, remove re-

taining ring (5) and thrust washer (6).

Discard thrust washer.

b. Remove cone and rollers (4).

5. INSPECT CONE AND ROLLERS (4).

a. Inspect cone and rollers (4) for damage.

See TM 9-214.

b. Replace cone and rollers (4) if

damaged.

GO TO NEXT PAGE

Change 2

4-337