TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 661 of 933

TM 9-2520-270-34

31. INSPECT LEFT-HAND RETAINER

PLATE ASSEMBLY (1).

a. Inspect plate (1) and insert (2)

for damage. See page 2-5.

b. Repair insert if damaged, See task

REPAlR LEFT-HAND RETAINER

PLATE ASSEMBLY INSERT, page 4-352.

33. INSTALL NEW SEAL (5).

a.

b.

c.

4-330

If seal (5) was removed or housing (6)

was replaced, go to step 33b. If

not, go to step 34.

Coat new seal (5) with transmission

oil.

Using plastic-faced hammer, tap

seal (5) into place with flat metal

surface facing outward until seal is

fully seated.

32. INSPECT LEFT-HAND OUTER

BRAKE ACTUATING PLATE (3).

a. Inspect plate (3) and screw hole

inserts (4) for damage. See page 2-5.

b. Repair inserts if damaged, See task

REPAIR LEFT-HAND BRAKE ACTU-

ATING PLATE INSERTS, page 4-350.

34. REPAIRER AND HELPER TURN

HOUSING (6) OVER.

35. INSTALL OUTER BRAKE ACTUATING

PLATE (3).

a.

b.

c.

Coat thrust washer (7) with

transmission oil and install.

Position plate (3) with eight

bearing ball recesses (8) showing.

Aline two screw holes (4) and “L” -

mark (9) with adjustment cover

area (10).