TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 674 of 933

TM 9-2520-270-34

27. POSITION MEASURING PLATE (1)

ACROSS OUTPUT HOUSING

COLLAR (2).

a. Place plate (1) across output

housing collar (2).

b. Position plate (1) to cover half of

output carrier splined hole (3).

STEP 28 DIMENSION B 0.

INCH

STEP 23 DIMENSION A - 0.

INCH

STEP 29 DIMENSION C = 0.

INCH

29. OBTAIN DIMENSION C.

a. Subtract dimension A from

dimension B.

b. Record as dimension C.

28. OBTAIN DIMENSlON B.

a. Using depth gage, measure distance

from top of plate (1) to bottom of

splined hole (3).

b. Record results as dimension B.

c. Remove pIate (1).

30. SELECT NEW WASHER (4) FROM SHIM

SET.

a. Using micrometer caliper set measure

one washer (4) from shim set that is

0.006 to 0.013 inch (0.15 to 0.33 mm)

less than dimension C.

GO TO NEXT PAGE

Change 3

4-343