TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 714 of 933

TM 9-2520-270-34

18. POSITION TRANSMISSION (1)

RIGHT SIDE UP.

WARNING

Hanging loads could kill

or injure you. Keep away

from hanging loads and

overhead equipment.

CAUTION

Do not contact hoses with hydraulic assembly

when lifting from transmission. Damage to

equipment can occur.

19. REPAIRER AND HELPER REMOVE

HYDRAULIC ASSEMBLY (2).

a. Remove one long bolt (3), seven

short bolts (4), and eight washers (5).

b. Attach lifting device (6) to removal

assembly (7) and lift out hydraulic

assembly (2).

20.

PLACE HYDRAULIC ASSEMBLY (2) ON

WORK SURFACE.

a.

b.

Lower hydraulic assembly (2) to

work surface.

Remove lifting device (6).

21.

REMOVE FIXTURE REMOVAL

ASSEMBLY (7).

a. Unscrew two screws (8) and

remove removal assembly (7).

21.1 INSPECT HYDRAULIC ASSEMBLY (2).

See task INSPECT RIGHT-HAND

HYDRAULIC ASSEMBLY, page 4-389.

GO TO NEXT PAGE

Change 1

4-381