TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 719 of 933

TM 9-2520-270-34

42. POSITION TRANSMISSION CONTROLLER

SIDE UP.

43. SECURE HOSE ASSEMBLY (1).

a. Install spacer (2).

b. Using 3/8-inch ratchet handle and

5/32-inch socket wrench attachment,

install new screw (3).

44. USING 3/8-lNCH DRIVE TORQUE

WRENCH, EXTENSION, AND 5/32-lNCH

SOCKET WRENCH ATTACHMENT,

TORQUE SCREW (3) TO 35-45 in-lb

(40-52 cmkg).

46. INSTALL TWO ELBOWS (6) AND

PREFORMED PACKINGS (7). See task

INSTALL ELBOW (45° AND 90°),

page 2-179.

4-386

Change 3

45. INSTALL NEW LOCKWIRE (4).

a. Using wire-twister pliers, install

Iockwire (4) through screw (3), around

hose assembly (1), and clamp (5).

47. INSTALL HOSE ASSEMBLY (8) ON TO

THIRD RANGE RELAY VALVE

ASSEMBLY (9).

a. Connect swivel nut (10) to adapter (11).

48. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-lNCH CROWFOOT,

TORQUE SWIVEL NUT (10) TO

125-135 in-lb (144-155 cmkg).