TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 724 of 933

9. INSPECT TANG (1) ON OUTER

RACE (2).

a. Inspect tang (1) for damage. See

page 2-5.

b. If tang (1) is not damaged, go to

step 10. If tang is damaged, go to

step 37.

CAUTION

Tools must not be used to inspect tightness

of parts. Staking of bushings can be damaged.

12. INSPECT NINE SCREWS (6) AND

STAKED BUSHINGS (7).

a.

If screws (6) and bushings (7) are

tight, go to step 13. If screws or

bushings are loose or missing, go

to step 37.

10. REPAIRER AND HELPER TURN

11.

HYDRAULIC ASSEMBLY SO THAT

INNER HYDRAULIC UNIT (3)

FACES UP.

INSPECT SPLINED TEETH (4) ON

INNER COUPLING (5).

a. If teeth (4) are not damaged, go to

step 12. If teeth are damaged, go to

step 37.

13. INSPECT INNER TRANSMISSION

CYLINDER BLOCK (8).

a. Rotate cylinder block (8) slowly.

b. If cylinder block (8) rotates freely,

go to step 14. If not, go to step 37.

GO TO NEXT PAGE

4-391

TM 9-2520-270-34