TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 713 of 933

TM 9-2520-270-34

14. USING WIRE-TWISTER PLIERS,

REMOVE AND DISCARD

LOCKWIRE (1).

16. REMOVE TWO HOSE TO BOSS

ELBOWS (5) AND PREFORMED

PACKINGS (6). DISCARD

PACKINGS.

4-380

15. RELEASE HOSE ASSEMBLY (2).

a. Using 3/8-inch drive ratchet handle

and 5/32-inch socket wrench

attachment, remove screw (3) and

spacer (4). Discard screw.

17. ATTACH FIXTURE REMOVAL

ASSEMBLY (7).

a.

b.

c.

Working on right side of trans-

mission (8) attach fixture assemby (7).

Install two screws (9) in screw

holes (10) in hydraulic assembly (11).

Tighten two screws (9).