TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 132 of 620
TM 9-2520-272-40
0017
14.Install two aluminum plugs (Figure 12, Item 12) f ush to 0.010 in. (0.254 mm) below surface of right cover
assembly (Figure 12, Item 1).
15.Install spring pin (Figure 12, Item 10) in boss on right cover assembly (Figure 12, Item 1). Push to height of
0.100 to 0.140 in. (2.540 to 3.556 mm) above surface.
16.Install two dowel pins (Figure 12, Item 8) in right cover assembly (Figure 12, Item 1). Push to height of 0.340
in. (8.636 mm) above surface.
17.Install two long brake reaction pins (Figure 12, Item 9) in right cover assembly (Figure 12, Item 1). Press to
height of 3.100 to 3.140 in. (78.740 to 79.756 mm) above surface.
Back to Top
