TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 130 of 620

TM 9-2520-272-40

0017

ASSEMBLE RIGHT COVER ASSEMBLY

NOTE

Some pipe plugs are precoated and do not require thread-locking lubricating sealant compound.

1. Apply sealant to pipe plugs (Figure 9, Item 15), (Figure 9, Item 16), (Figure 9, Item 17), (Figure 9, Item 18),

and (Figure 9, Item 19).

2. Install 3/8 in. pipe plug (Figure 9, Item 19) in right cover assembly (Figure 9, Item 1).

3. Torque plug (Figure 9, Item 19) to 12 to 16 lb-ft (16 to 22 N·m).

4. Install 1/4 in. pipe plug (Figure 9, Item 15) in right cover assembly (Figure 9, Item 1).

5. Torque plug (Figure 9, Item 15) to 96 to 120 lb-in. (11 to 13 N·m).

6. Install 1/8 in. pipe plugs (Figure 9, Item 16) and (Figure 9, Item 17) in right cover assembly (Figure 9, Item 1).

7. Torque plugs (Figure 9, Item 16) and (Figure 9, Item 17) to 50 to 60 lb-in. (6 to 7 N·m).

8. Install 3/8 in. pipe plug (Figure 9, Item 18) in right cover assembly (Figure 9, Item 1).

9. Torque plug (Figure 9, Item 18) to 12 to 16 lb-ft (16 to 22 N·m).

10.Turn right cover assembly (Figure 9, Item 1) over, inside up.