TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 120 of 620

TM 9-2520-272-40

0016

12.Install the new right brake adjusting cover gasket (Figure 8, Item 5) and the right brake adjusting cover (Figure

8, Item 4) on the right cover assembly (Figure 8, Item 1).

NOTE

Of the six bolts and washers that attach the brake adjusting cover to the end cover, the chain

for oil f ller cap is bolted under the top outside bolt and washer. The bolt is installed at the

hole closest to the f ller cap.

13.Install six bolts (Figure 8, Item 2) and six washers (Figure 8, Item 3) in the right brake adjusting cover (Figure

8, Item 4).

14

.Torques

ixbo

l

ts(F

igure8

,I

tem2)to13to15lb-

f

t(17to20N·m)

.

NOTE

The right adjusting brake cover should have a pipe plug installed at the oil drain line location

(shipping).

15.Install new pipe plug (Figure 8, Item 20) (TM 9-2350-277-13&P) if the pipe plug (Figure 8, Item 20) is missing

and transmission is to be put in storage.

16.Torque pipe plug (Figure 8, Item 20) to 18 to 22 lb-ft (24 to 30 N·m).