TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 114 of 620
TM 9-2520-272-40
0016
NOTE
Two legs of the multiple-leg sling are used in this task. When the sling bolts are tightened,
they loosen the right cover from transmission.
7. Install one 3/8-inch washer (Figure 3, Item 11) on each of two 3/8-16 x 2 inch bolts (Figure 3, Item 10), and
install bolts (Figure 3, Item 10) through lugs of multiple-leg sling (Figure 3, Item 12).
8. Install one bolt (Figure 3, Item 10) protruding from sling lug (Figure 3, Item 12) into each hole (Figure 3,
Item 13) on right cover assembly (Figure 3, Item 1).
9. Tighten one bolt (Figure 3, Item 10) then the other bolt (Figure 3, Item 10) until right cover assembly (Figure 3,
Item 1) loosens.
10.Strike elbow (Figure 3, Item 15) lightly to loosen right cover assembly (Figure 3, Item 1).
WARNING
Back to Top
