TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 104 of 620

TM 9-2520-272-40

0015

REMOVE SEPARATOR PLATE

NOTE

Transmission is upright on foororworktab

le

.

1. Remove two f anged-head bolts (Figure 1, Item 4) from separator plate (Figure 1, Item 3).

2. Remove f ve bolts (Figure 1, Item 6) and f ve washers (Figure 1, Item 5) from separator plate (Figure 1, Item 3).

3. Remove bolt (Figure 1, Item 1) and washer (Figure 1, Item 2) from separator plate (Figure 1, Item 3).

4. Remove separator plate (Figure 1, Item 3).