TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 99 of 620
TM 9-2520-272-40
0014
3. Install wiring harness connector body (Figure 4, Item 5) into transmission center housing opening (Figure 4,
Item 12) with key (Figure 4, Item 14) in receptacle (Figure 4, Item 15) located at bottom.
4. Install four new No. 4-40 x 7/16 inch screws (Figure 4, Item 6) holding wiring harness connector body (Figure 4,
Item 5) and new gasket (Figure 4, Item 10) to transmission.
5. Torque four screws (Figure 4, Item 6) to 3 to 5 lb-in. (0.3 to 0.6 N·m).
Back to Top
