TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 101 of 620
TM 9-2520-272-40
0014
6. Push connectors (Figure 6, Item 7) and (Figure 6, Item 25) together until ends of connector loops (Figure 6,
Item 24) are down behind ends of bayonets (Figure 6, Item 23).
7. Install 5/16-18 x 2-3/4 inch bolt (Figure 7, Item 2) through washer (Figure 7, Item 3) and through eye of harness
ground connector (Figure 7, Item 4).
8. Install bolt (Figure 7, Item 2) and washer (Figure 7, Item 3) through main control valve assembly (Figure
7, Item 1).
9
. Torquebo
l
t(F
igure7
,I
tem2)to17to20lb-
f
t(23to27N·m)
.
Back to Top
