TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 100 of 620

TM 9-2520-272-40

0014

INSTALL WIRING HARNESS

NOTE

Connectors on solenoids and connectors on wiring harness look the same except for color.

Connectors are mated by pushing them together with connector loops over bayonets.

Connectors are locked in place when ends of loops are down behind bayonets.

All solenoids are the same and they are interchangeable. For that reason, solenoid connectors

are not marked with solenoid identif cation. However, each lead of the wiring harness must go

to a specif c solenoid location. The letter stamped on the wiring harness connector indicates

location of solenoid to be connected.

Locations of solenoid A (Figure 5, Item 20), solenoid B (Figure 5, Item 19), solenoid C (Figure

6, Item 21), solenoid D (Figure 5, Item 22), solenoid E (Figure 5, Item 18), solenoid F (Figure 5,

Item 17), and solenoid G (Figure 5, Item 16) are shown in Figure 5.