TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 122 of 620

TM 9-2520-272-40

0017

DISASSEMBLE RIGHT COVER ASSEMBLY

NOTE

Right cover assembly is mounted on two wooden blocks, inside up.

1. Put pin punch in left brake apply bore beyond bearing (Figure 1, Item 3) so that edge of punch is seated

behind edge of seal (Figure 1, Item 4).

2. Remove seal (Figure 1, Item 4) from bore in right cover assembly (Figure 1, Item 1).

3. Remove seal (Figure 1, Item 5) from beyond bearing (Figure 1, Item 2) in right brake apply cam shaft bore.

4. Turn right cover assembly (Figure 1, Item 1) over, outside up.

5. Remove bearings (Figure 1, Item 2) and (Figure 1, Item 3) from right cover assembly (Figure 1, Item 1).