TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 121 of 620
TM 9-2520-272-40
0017
SUSTAINMENT MAINTENANCE
REPAIR RIGHT COVER ASSEMBLY
INITIAL SETUP:
Tools and Special Tools
Adapter, Socket Wrench Drive, 3/8” Male x 1/2”
Female (WP 0079, Item 2)
Chisel, Cold, 3/8”, Flat (WP 0079, Item 7)
Drill, Electric, Portable, 3/8” Chuck (WP 0079, Item
13)
Drill Bit, 1/4”, Twist (WP 0079, Item 14)
Drill Set, Twist, 3/8” Shank, 3/4” Drill (WP 0079, Item
15)
Gage, Vernier Caliper, 0-6” (WP 0079, Item 18)
Heater, Gun-Type, Electric (WP 0079, Item 20) (2)
Inserter and Remover, Seal (WP 0079, Item 24)
Inserter, Seal (WP 0079, Item 23)
Insert Installer, Remover (WP 0075, Item 6)
Press, Arbor, Hand, 25 Ton (WP 0079, Item 28)
Puller Set, Mechanical, Gear and Bearing, 3-Jaw
(WP 0079, Item 30)
Sander/Grinder, 4-1/2” (WP 0079, Item 31)
Slide Hammer Puller (WP 0079, Item 34)
Tool Kit, General Mechanic’s (GMTK) (WP 0079,
Item 45)
Wrench, Torque, Ratcheting, 1/2” Drive, 250 lb-ft
(WP 0079, Item 51)
Materials/Parts
Block, Wood, Lumber, Soft Wood (WP 0078, Item 3)
(2 - 16 in. lengths)
Carbon Dioxide, Technical (Dry Ice) (WP 0078, Item
4)
Cloth, Abrasive, Crocus (WP 0078, Item 6)
Gloves, Leather (WP 0078, Item 8)
Lubricating Oil, Engine (WP 0078, Item 10)
Petrolatum, Technical (Petroleum Jelly) (WP 0078,
Item 12)
Sealant, Lubricating, Thread-Locking (WP 0078,
Item 15)
Personnel Required
Track Vehicle Repairer, 91H10 (2)
References
TM 9-2520-272-40P
Equipment Condition
Transmission removed from vehicle or container (TM
9-2350-277-13&P)
Oil f ll tube assembly removed (WP 0006)
Right cover assembly removed (WP 0016)
0017
‐
1
Back to Top
