TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 206 of 620

TM 9-2520-272-40

0025

INSTALL BRAKE APPLY CAM AND BRAKE ADJUSTING LINKS

1. Install new O-rings (Figure 17, Item 9) and (Figure 17, Item 10) into face of brake apply cam (Figure 17, Item 4).

CAUTION

Make sure seals are installed with seal lips in direction shown in illustration. If seals are not

installed properly, components will not function properly.

2. Install new seal (Figure 17, Item 6), seal lip down, in brake apply cam (Figure 17, Item 4).

3. Install new seal (Figure 17, Item 5), seal lip upward, in brake apply cam (Figure 17, Item 4).

4. Apply a layer of petrolatum to seals and O-rings (Figure 17, Item 5), (Figure 17, Item 6), (Figure 17, Item

9), and (Figure 17, Item 10).

5. Hold two spring tension clips (Figure 17, Item 12) in position on brake apply cam (Figure 17, Item 4) as shown

in Figure 17.

6. Install bolt (Figure 17, Item 11) to keep clips (Figure 17, Item 12) in position.

7

. Torquebo

l

t(F

igure17

,I

tem11)to108to132lb-

in

.(12to15N·m)

.