TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 203 of 620

TM 9-2520-272-40

0025

CAUTION

Unless the brake clutch pack is new, keep all friction and reaction plates in the same order

and facing the same way. When one plate is replaced, replace the entire clutch pack. Each

used plate has made its own contour and wear pattern. The clutch assembly may not operate

effectively because plates in the pack may have poor surface contact when:

A plate is turned over.

A plate position in the pack is changed.

A new plate is inserted in the pack.

NOTE

A brake clutch pack has six internally splined friction plates and f ve reaction (steel) plates and

should be put fully into lubricating oil for a minimum of two minutes before installing the pack.

17.Soak brake clutch pack (Figure 13, Item 36) in lubricating oil for a minimum of two minutes.