TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 195 of 620
TM 9-2520-272-40
0025
10.Remove clutch reaction plate (Figure 4, Item 14) from spring guide pins (Figure 4, Item 16).
11. Remove six springs (Figure 4, Item 17) from spring guide pins (Figure 4, Item 16).
CAUTION
Keep all clutch plates in the same order and facing the same way. When one plate is replaced,
replace the entire clutch pack. Each used plate has made its own contour and wear pattern.
The clutch assembly may not operate effectively because plates in the pack may have poor
surface contact when:
A plate is facing the opposite direction.
A plate position in the pack is changed.
A new plate is inserted in the pack.
12.Remove the right brake pack having six internal splined clutch (friction) plates (Figure 4, Item 19) and f ve clutch
reaction (steel) plates (Figure 4, Item 18).
Back to Top
