TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012
TM-9-2520-272-40

  TM-9-2520-272-40 - Page 189 of 620

TM 9-2520-272-40
0024
23.Turn the right brake support assembly (Figure 8, Item 6) over so that the internal side points up.
24.Install the long brake reaction pin (Figure 8, Item 2) in the right brake support assembly (Figure 8, Item 6). Push
the long brake reaction pin to a height of 3.511 to 3.531 in. (89.18 to 89.69 mm) above the inner surface of the
right brake support assembly.
25.Install the two dowel pins (Figure 8, Item 5) in the right brake support assembly (Figure 8, Item 6). Push pins
to a height of 0.230 to 0.250 in. (5.84 to 6.35 mm) from the shoulder.


Back to Top