TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 184 of 620
TM 9-2520-272-40
0024
CAUTION
Be careful not to cut into right brake support assembly when you cut slots in the bearing race.
10.Cut two slots 180 degrees apart at the base of the bearing race (Figure 3, Item 7) as shown in Figure 2. Cut the
slots slightly offset so that the pry bars will overlap. Cut the slots deep enough to catch the lip of the pry bar but
not deep enough to cut into the right brake support assembly (Figure 3, Item 6).
WARNING
Back to Top
